COM’s are accepted at Grade #3 pricing. The factory has the right to add a 15%-20% charge to COM’s for patterned, striped, directional, or material that is difficult to work with. This includes solid colored materials that are to be run in a single direction ie: velour, faux suede, mico-suede, Mohair, etc. Specific, written in- structions need to be provided on the order if pattern matching is required. COM’s should be clearly labeled when forwarded to the factory. No material will be accepted COD or freight collect. A sample of the fabric should be sent with the order stating the supplier, pattern name, yardage supplied, face of the material, and the direction (if necessary) the material should run on the furniture. If specific information about the applica- tion of COM material is not provided, M. Deitz & Sons, Inc. will apply the material in the way it deems proper, and will not be held liable for incorrect installation. This includes the use of Polyurethane materials. It is suggested that the manufacturer of the material(s) being provided as COM be contacted in advance to find out the limitations or requirements for application. COM requirements listed in our literature are based on upholstering 1 piece of furniture. Larger orders generally will require less material. It is advisable to contact the factory in advance for exact yardage requirements. All COM amounts are based on 54” wide usable ma- terial. Narrower widths, patterned, directional or striped materials will require additional yardage. M. Deitz & Sons, Inc. reserves the right to refuse the use of any COM due to inadequate quality, workability, stretch or pattern. Any furniture upholstered with a COM is considered a custom item and is not returnable once shipped.